2 layer rigid flex pcb Shengyi material for auto combination switch lever-Case
| Technical requirements | ||||||
| Product type | Rigid Flex Printed Circuit Board | |||||
| Number of layer | 2 Layers | |||||
| Line width and line spacing |
0.15MM/0.1MM | |||||
| Plate thickness | FPC=0.15MM T=1.6MM | |||||
| Copper Thickness | 1OZ | |||||
| Film Thickness | 50UM | |||||
| Surface Treatment | ENIG 2-3Uin | |||||
| Tolerance Requirements | 0.1MM | |||||
| Material | Shengyi TG170 copper clad laminate | |||||
| Characteristic | High adhesion, high reliability | |||||
| Functional testing | AOI/four-wire/continuity/copper slices | |||||
| Application Vehicle | GAC Motor | |||||
| Application | Car Combination Switch Lever | |||||
Application showcase
Post time: Aug-10-2023
Back
